01
China Suppliers Factory Wire Trim Edge Cutting Tape - Polyester Double Sided PET with Acrylic Adhesive for Powder Spray Trim
Video
Wire Trim Edge Cutting Tape
Wire Trim is used to trim many types of coatings. Trim a wide variety of coatings, from medium durometer polyurethane to high durometer polyurea's. The main function of Wire Trim Edge Cutting Tape is trimming through strong coatings from the bottom up. The method involves the use of a small high-strength cutting filament, adhered to the edge of adhesive tape and positioned on a surface along the desired trim line where the coating is to be applied.
Structure of Polyurethane Wire Trim Tape
🔩 PET + Stainless Steel / Fiber + Glue + Paper / Film Liner
Technical Data of Bedliner Wire Cutting Tape
| Applications | Trim coatings |
| Tape Adhesive | Double-Sided, High Tack |
| Tape Dimensions | 1/4-Inch X 100 Feet or 1/3-inch x 100 Feet etc. |
| Colors | Transparent |
| Material | Polyester, Polyurethane, Metal |
| Liner | Paper / Film |
| Recommended Uses | Industrial, Construction, Electrical, Plastic |
Benefits Of Wire Trim Tape
- Enables sharp, precise cuts through tough polyurethane and polyurea coatings
- Cut from the bottom up, protecting the surface
- Fast, residue-free removal when de-masking
- The process of installing a spray on bedliner much faster and easier
Application Of Wire Trim Tape
Steel Wire Trim Edge Cutting Tape widely used in the field of car and subway spraying points. Also using Wire Trim for Pickup Truck Bedliners.
Application Process of Stainless Steel Cutting Wire Tape
Here the application process is illustrated as Wire Trim is used to trim a spray-on truck bedliner.
1
Remove wax and silicone from a dirt-free surface. Then apply Wire Trim along all trim lines. For best results, notch tape to conform to tight corners and gently stretch the tape around curves.
2
Apply PlazMask, our pre-folded masking film, or masking paper, then scuff right up to the wire edge. Wire Trim is durable enough to withstand most prep work. Wire Trim's patented technology makes it easy to work fast. The special adhesive permits repositioning if required.
3
Proceed to spray the pick up truck bed just as you would normally, directly over the WireTrim tape and any other masking products you used in preparation for the spray job.
4
Pull the wire through the coating to provide a clean finished edge at an angle that suits your style. Choose from standard or heavy-duty wire to best suit your application. Always pull wire out as soon as possible after application.
5
Remove PlazMask or masking paper and tape to complete the trimming process. Our Proline products feature a high tack adhesive, remove slowly to eliminate clean up.
Packing of WireTrim Tape
📦 10 Rolls / Bag | 1 Bag / Box | 9 Boxes / Carton
Wire Trim Tips & Helpful Hints
Adhesive is left behind after tape is removed
As a rule, Wire Trim should never leave adhesive residue behind once the tape has been removed from the vehicle. Try pulling the tape at a slower pace in order to ensure that all the adhesive remains with the tape and does not stay on the vehicle.
Frequently Asked Questions
What is Wire Trim Edge Cutting Tape used for?
Wire Trim Edge Cutting Tape is used to create clean, precise edges when applying spray-on coatings such as polyurethane and polyurea. It trims through strong coatings from the bottom up using a high-strength cutting filament embedded in the tape.
What coatings can Wire Trim cut through?
Wire Trim is capable of cutting through a wide range of coatings, from medium durometer polyurethane to high durometer polyurea. It is commonly used for spray-on truck bedliners and other industrial coating applications.
What are the available sizes for Wire Trim Tape?
Wire Trim Tape is available in 1/4-inch x 100 feet and 1/3-inch x 100 feet sizes, among other options. It is transparent and features a double-sided, high tack adhesive for secure positioning.
How do I prevent adhesive residue when removing Wire Trim Tape?
To prevent adhesive residue from being left on the vehicle surface, pull the tape at a slower pace during removal. This ensures that all the adhesive stays with the tape rather than remaining on the surface.
When should the wire be pulled through the coating?
The wire should always be pulled through the coating as soon as possible after the coating has been applied. This helps achieve a clean, finished edge and makes removal easier before the coating fully cures.
How is Wire Trim Tape packaged for shipping?
Wire Trim Tape is packaged with 10 rolls per bag, 1 bag per box, and 9 boxes per carton. This packaging ensures safe transport and convenient storage for professional and industrial users.